In this chapter we describe the methods that are available in Semigroups for determining the attributes of a semigroup, and the operations which can be applied to a semigroup.
‣ AsListCanonical( S ) | ( attribute ) |
‣ EnumeratorCanonical( S ) | ( attribute ) |
‣ IteratorCanonical( S ) | ( operation ) |
Returns: A list, enumerator, or iterator.
When the argument S is a semigroup satisfying CanUseFroidurePin (6.1-4), AsListCanonical returns a list of the elements of S in the order they are enumerated by the Froidure-Pin Algorithm. This is the same as the order used to index the elements of S in RightCayleyDigraph (11.2-1) and LeftCayleyDigraph (11.2-1).
EnumeratorCanonical and IteratorCanonical return an enumerator and an iterator where the elements are ordered in the same way as AsListCanonical. Using EnumeratorCanonical or IteratorCanonical will often use less memory than AsListCanonical, but may have slightly worse performance if the elements of the semigroup are looped over repeatedly. EnumeratorCanonical returns the same list as AsListCanonical if AsListCanonical has ever been called for S.
If S is an acting semigroup, then the value returned by AsList may not equal the value returned by AsListCanonical. AsListCanonical exists so that there is a method for obtaining the elements of S in the particular order used by RightCayleyDigraph (11.2-1) and LeftCayleyDigraph (11.2-1).
See also PositionCanonical (11.1-2).
gap> S := Semigroup(Transformation([1, 3, 2]));; gap> AsListCanonical(S); [ Transformation( [ 1, 3, 2 ] ), IdentityTransformation ] gap> IteratorCanonical(S); <iterator> gap> EnumeratorCanonical(S); [ Transformation( [ 1, 3, 2 ] ), IdentityTransformation ] gap> S := Monoid([Matrix(IsBooleanMat, [[1, 0, 0], > [0, 1, 0], > [0, 1, 0]])]); <commutative monoid of 3x3 boolean matrices with 1 generator> gap> it := IteratorCanonical(S); <iterator> gap> NextIterator(it); Matrix(IsBooleanMat, [[1, 0, 0], [0, 1, 0], [0, 0, 1]]) gap> en := EnumeratorCanonical(S); <enumerator of <commutative monoid of size 2, 3x3 boolean matrices with 1 generator>> gap> en[1]; Matrix(IsBooleanMat, [[1, 0, 0], [0, 1, 0], [0, 0, 1]]) gap> Position(en, en[1]); 1 gap> Length(en); 2
‣ PositionCanonical( S, x ) | ( operation ) |
Returns: A positive integer or fail.
When the argument S is a semigroup satisfying CanUseFroidurePin (6.1-4) and x is an element of S, PositionCanonical returns the position of x in AsListCanonical(S) or equivalently the position of x in EnumeratorCanonical(S).
See also AsListCanonical (11.1-1) and EnumeratorCanonical (11.1-1).
gap> S := FullTropicalMaxPlusMonoid(2, 3); <monoid of 2x2 tropical max-plus matrices with 13 generators> gap> x := Matrix(IsTropicalMaxPlusMatrix, [[1, 3], [2, 1]], 3); Matrix(IsTropicalMaxPlusMatrix, [[1, 3], [2, 1]], 3) gap> PositionCanonical(S, x); 234 gap> EnumeratorCanonical(S)[234] = x; true
‣ Enumerate( S[, limit] ) | ( operation ) |
Returns: A semigroup (the argument).
If S is a semigroup with representation CanUseFroidurePin (6.1-4) and limit is a positive integer, then this operation can be used to enumerate at least limit elements of S, or Size(S) elements if this is less than limit, using the Froidure-Pin Algorithm.
If the optional second argument limit is not given, then the semigroup is enumerated until all of its elements have been found.
gap> S := FullTransformationMonoid(7); <full transformation monoid of degree 7> gap> Enumerate(S, 1000); <full transformation monoid of degree 7>
‣ IsEnumerated( S ) | ( operation ) |
Returns: true or false.
If S is a semigroup with representation CanUseFroidurePin (6.1-4), then this operation returns true if the Froidure-Pin Algorithm has been run to completion (i.e. all of the elements of S have been found) and false if S has not been fully enumerated.
‣ RightCayleyDigraph( S ) | ( attribute ) |
‣ LeftCayleyDigraph( S ) | ( attribute ) |
Returns: A digraph.
When the argument S is a semigroup satisfying CanUseFroidurePin (6.1-4), RightCayleyDigraph returns the right Cayley graph of S, as a Digraph (Digraphs: Digraph) digraph where vertex OutNeighbours(digraph)[i][j] is PositionCanonical(S, AsListCanonical(S)[i] * GeneratorsOfSemigroup(S)[j]). The digraph returned by LeftCayleyDigraph is defined analogously.
The digraph returned by this attribute belongs to the category IsCayleyDigraph (Digraphs: IsCayleyDigraph), the semigroup S and the generators used to create the digraph can be recovered from the digraph using SemigroupOfCayleyDigraph (Digraphs: SemigroupOfCayleyDigraph) and GeneratorsOfCayleyDigraph (Digraphs: GeneratorsOfCayleyDigraph).
gap> S := FullTransformationMonoid(2); <full transformation monoid of degree 2> gap> RightCayleyDigraph(S); <immutable multidigraph with 4 vertices, 12 edges> gap> LeftCayleyDigraph(S); <immutable multidigraph with 4 vertices, 12 edges>
‣ Random( S ) | ( method ) |
Returns: A random element.
This function returns a random element of the semigroup S. If the elements of S have been calculated, then one of these is chosen randomly. Otherwise, if the data structure for S is known, then a random element of a randomly chosen R-class is returned. If the data structure for S has not been calculated, then a short product (at most 2 * Length(GeneratorsOfSemigroup(S))) of generators is returned.
‣ IndexPeriodOfSemigroupElement( x ) | ( operation ) |
Returns: A list of two positive integers.
If x is a semigroup element, then IndexPeriodOfSemigroupElement(x) returns the pair [m, r], where m and r are the least positive integers such that x^(m + r) = x ^ m. The number m is known as the index of x, and the numberr is known as the period of x.
gap> x := Transformation([2, 6, 3, 5, 6, 1]);; gap> IndexPeriodOfSemigroupElement(x); [ 2, 3 ] gap> m := IndexPeriodOfSemigroupElement(x)[1];; gap> r := IndexPeriodOfSemigroupElement(x)[2];; gap> x ^ (m + r) = x ^ m; true gap> x := PartialPerm([0, 2, 3, 0, 5]); <identity partial perm on [ 2, 3, 5 ]> gap> IsIdempotent(x); true gap> IndexPeriodOfSemigroupElement(x); [ 1, 1 ]
‣ SmallestIdempotentPower( x ) | ( attribute ) |
Returns: A positive integer.
If x is a semigroup element, then SmallestIdempotentPower(x) returns the least positive integer n such that x^n is an idempotent. The smallest idempotent power of x is the least multiple of the period of x that is greater than or equal to the index of x; see IndexPeriodOfSemigroupElement (11.4-1).
gap> x := Transformation([4, 1, 4, 5, 1]); Transformation( [ 4, 1, 4, 5, 1 ] ) gap> SmallestIdempotentPower(x); 3 gap> ForAll([1 .. 2], i -> not IsIdempotent(x ^ i)); true gap> IsIdempotent(x ^ 3); true gap> x := Bipartition([[1, 2, -3, -4], [3, -5], [4, -1], [5, -2]]); <block bijection: [ 1, 2, -3, -4 ], [ 3, -5 ], [ 4, -1 ], [ 5, -2 ]> gap> SmallestIdempotentPower(x); 4 gap> ForAll([1 .. 3], i -> not IsIdempotent(x ^ i)); true gap> x := PartialPerm([]); <empty partial perm> gap> SmallestIdempotentPower(x); 1 gap> IsIdempotent(x); true
It is possible to express an element of a semigroup as a word in the generators of that semigroup. This section describes how to accomplish this in Semigroups.
‣ EvaluateWord( gens, w ) | ( operation ) |
Returns: A semigroup element.
The argument gens should be a collection of generators of a semigroup and the argument w should be a list of positive integers less than or equal to the length of gens. This operation evaluates the word w in the generators gens. More precisely, EvaluateWord(gens, w) returns the equivalent of:
Product(List(w, i -> gens[i]));
see also Factorization (11.5-2).
When gens is a list of elements of a semigroup and w is a list of positive integers less than or equal to the length of gens, this operation returns the product gens[w[1]] * gens[w[2]] * .. . * gens[w[n]] when the length of w is n.
When gens is a list of elements with a semigroup inverse and w is a list of non-zero integers whose absolute value does not exceed the length of gens, this operation returns the product gens[AbsInt(w[1])] ^ SignInt(w[1]) * .. . * gens[AbsInt(w[n])] ^ SignInt(w[n]) where n is the length of w.
Note that EvaluateWord(gens, []) returns One(gens) if gens belongs to the category IsMultiplicativeElementWithOne (Reference: IsMultiplicativeElementWithOne).
gap> gens := [ > Transformation([2, 4, 4, 6, 8, 8, 6, 6]), > Transformation([2, 7, 4, 1, 4, 6, 5, 2]), > Transformation([3, 6, 2, 4, 2, 2, 2, 8]), > Transformation([4, 3, 6, 4, 2, 1, 2, 6]), > Transformation([4, 5, 1, 3, 8, 5, 8, 2])];; gap> S := Semigroup(gens);; gap> x := Transformation([1, 4, 6, 1, 7, 2, 7, 6]);; gap> word := Factorization(S, x); [ 4, 2 ] gap> EvaluateWord(gens, word); Transformation( [ 1, 4, 6, 1, 7, 2, 7, 6 ] ) gap> S := SymmetricInverseMonoid(10);; gap> x := PartialPerm([2, 6, 7, 0, 0, 9, 0, 1, 0, 5]); [3,7][8,1,2,6,9][10,5] gap> word := Factorization(S, x); [ -2, -2, -2, -2, -3, -2, -2, -2, -2, -2, 5, 2, 5, 5, 2, 5, 2, 2, 2, 2, -3, 2, 2, 2, 3, 2, 2, 2, 2, 2, 2, 2, 2, 3, 2, 3, 2 ] gap> EvaluateWord(GeneratorsOfSemigroup(S), word); [3,7][8,1,2,6,9][10,5]
‣ Factorization( S, x ) | ( operation ) |
Returns: A word in the generators.
When S is a semigroup and x belongs to S, Factorization return a word in the generators of S that is equal to x. In this case, a word is a list of positive integers where an entry i corresponds to GeneratorsOfSemigroups(S)[i]. More specifically,
EvaluateWord(GeneratorsOfSemigroup(S), Factorization(S, x)) = x;
When S is an inverse semigroup and x belongs to S, Factorization return a word in the generators of S that is equal to x. In this case, a word is a list of non-zero integers where an entry i corresponds to GeneratorsOfSemigroup(S)[i] and -i corresponds to GeneratorsOfSemigroup(S)[i] ^ -1. As in the previous case,
EvaluateWord(GeneratorsOfSemigroup(S), Factorization(S, x)) = x;
Note that Factorization does not always return a word of minimum length; see MinimalFactorization (11.5-3).
See also EvaluateWord (11.5-1) and GeneratorsOfSemigroup (Reference: GeneratorsOfSemigroup).
gap> gens := [Transformation([2, 2, 9, 7, 4, 9, 5, 5, 4, 8]), > Transformation([4, 10, 5, 6, 4, 1, 2, 7, 1, 2])];; gap> S := Semigroup(gens);; gap> x := Transformation([1, 10, 2, 10, 1, 2, 7, 10, 2, 7]);; gap> word := Factorization(S, x); [ 2, 2, 1, 2 ] gap> EvaluateWord(gens, word); Transformation( [ 1, 10, 2, 10, 1, 2, 7, 10, 2, 7 ] ) gap> S := SymmetricInverseMonoid(8); <symmetric inverse monoid of degree 8> gap> x := PartialPerm([1, 2, 3, 4, 5, 8], [7, 1, 4, 3, 2, 6]); [5,2,1,7][8,6](3,4) gap> word := Factorization(S, x); [ -2, -2, -2, -2, -2, -2, 2, 4, 4, 2, 3, 2, -3, -2, -2, 3, 2, -3, -2, -2, 4, -3, -4, 2, 2, 3, -2, -3, 4, -3, -4, 2, 2, 3, -2, -3, 2, 2, 3, -2, -3, 2, 2, 3, -2, -3, 4, -3, -4, 3, 2, -3, -2, -2, 3, 2, -3, -2, -2, 4, 3, -4, 3, 2, -3, -2, -2, 3, 2, -3, -2, -2, 3, 2, 2, 3, 2, 2, 2, 2 ] gap> EvaluateWord(GeneratorsOfSemigroup(S), word); [5,2,1,7][8,6](3,4) gap> S := DualSymmetricInverseMonoid(6);; gap> x := S.1 * S.2 * S.3 * S.2 * S.1; <block bijection: [ 1, 6, -4 ], [ 2, -2, -3 ], [ 3, -5 ], [ 4, -6 ], [ 5, -1 ]> gap> word := Factorization(S, x); [ -2, -2, -2, -2, -2, 4, 2 ] gap> EvaluateWord(GeneratorsOfSemigroup(S), word); <block bijection: [ 1, 6, -4 ], [ 2, -2, -3 ], [ 3, -5 ], [ 4, -6 ], [ 5, -1 ]>
‣ MinimalFactorization( S, x ) | ( operation ) |
Returns: A minimal word in the generators.
This operation returns a minimal length word in the generators of the semigroup S that equals the element x. In this case, a word is a list of positive integers where an entry i corresponds to GeneratorsOfSemigroups(S)[i]. More specifically,
EvaluateWord(GeneratorsOfSemigroup(S), MinimalFactorization(S, x)) = x;
MinimalFactorization involves exhaustively enumerating S until the element x is found, and so MinimalFactorization may be less efficient than Factorization (11.5-2) for some semigroups.
Unlike Factorization (11.5-2) this operation does not distinguish between semigroups and inverse semigroups. See also EvaluateWord (11.5-1) and GeneratorsOfSemigroup (Reference: GeneratorsOfSemigroup).
gap> S := Semigroup(Transformation([2, 2, 9, 7, 4, 9, 5, 5, 4, 8]), > Transformation([4, 10, 5, 6, 4, 1, 2, 7, 1, 2])); <transformation semigroup of degree 10 with 2 generators> gap> x := Transformation([8, 8, 2, 2, 9, 2, 8, 8, 9, 9]); Transformation( [ 8, 8, 2, 2, 9, 2, 8, 8, 9, 9 ] ) gap> Factorization(S, x); [ 1, 2, 1, 1, 1, 2, 1, 1, 1, 2, 1, 1, 1, 2, 1 ] gap> MinimalFactorization(S, x); [ 1, 2, 1, 1, 1, 1, 2, 2, 1 ]
‣ NonTrivialFactorization( S, x ) | ( operation ) |
Returns: A non-trivial word in the generators, or fail.
When S is a semigroup and x belongs to S, this operation returns a non-trivial word in the generators of the semigroup S that equals x, if one exists. The definition of a word in the generators is the same as given in Factorization (11.5-2) for semigroups and inverse semigroups. A word is non-trivial if it has length two or more.
If no non-trivial word for x exists, then x is an indecomposable element of S and this operation returns fail; see IndecomposableElements (11.6-6).
When x does not belong to GeneratorsOfSemigroup(S), any factorization of x is non-trivial. In this case, NonTrivialFactorization returns the same word as Factorization (11.5-2).
See also EvaluateWord (11.5-1) and GeneratorsOfSemigroup (Reference: GeneratorsOfSemigroup).
gap> x := Transformation([5, 4, 2, 1, 3]);; gap> y := Transformation([4, 4, 2, 4, 1]);; gap> S := Semigroup([x, y]); <transformation semigroup of degree 5 with 2 generators> gap> NonTrivialFactorization(S, x * y); [ 1, 2 ] gap> Factorization(S, x); [ 1 ] gap> NonTrivialFactorization(S, x); [ 1, 1, 1, 1, 1, 1 ] gap> Factorization(S, y); [ 2 ] gap> NonTrivialFactorization(S, y); [ 2, 1, 1, 1, 1, 1 ] gap> z := PartialPerm([2]);; gap> S := Semigroup(z); <commutative partial perm semigroup of rank 1 with 1 generator> gap> NonTrivialFactorization(S, z); fail
‣ Generators( S ) | ( attribute ) |
Returns: A list of generators.
Generators returns a generating set that can be used to define the semigroup S. The generators of a monoid or inverse semigroup S, say, can be defined in several ways, for example, including or excluding the identity element, including or not the inverses of the generators. Generators uses the definition that returns the least number of generators. If no generating set for S is known, then GeneratorsOfSemigroup is used by default.
Generators(S) is a synonym for GeneratorsOfGroup (Reference: GeneratorsOfGroup).
Generators(S) is a synonym for GeneratorsOfSemigroupIdeal (9.2-1).
Generators(S) is a synonym for GeneratorsOfSemigroup (Reference: GeneratorsOfSemigroup).
Generators(S) is a synonym for GeneratorsOfMonoid (Reference: GeneratorsOfMonoid).
Generators(S) is a synonym for GeneratorsOfInverseSemigroup (Reference: GeneratorsOfInverseSemigroup).
Generators(S) is a synonym for GeneratorsOfInverseMonoid (Reference: GeneratorsOfInverseMonoid).
gap> M := Monoid([ > Transformation([1, 4, 6, 2, 5, 3, 7, 8, 9, 9]), > Transformation([6, 3, 2, 7, 5, 1, 8, 8, 9, 9])]);; gap> GeneratorsOfSemigroup(M); [ IdentityTransformation, Transformation( [ 1, 4, 6, 2, 5, 3, 7, 8, 9, 9 ] ), Transformation( [ 6, 3, 2, 7, 5, 1, 8, 8, 9, 9 ] ) ] gap> GeneratorsOfMonoid(M); [ Transformation( [ 1, 4, 6, 2, 5, 3, 7, 8, 9, 9 ] ), Transformation( [ 6, 3, 2, 7, 5, 1, 8, 8, 9, 9 ] ) ] gap> Generators(M); [ Transformation( [ 1, 4, 6, 2, 5, 3, 7, 8, 9, 9 ] ), Transformation( [ 6, 3, 2, 7, 5, 1, 8, 8, 9, 9 ] ) ] gap> S := Semigroup(Generators(M));; gap> Generators(S); [ Transformation( [ 1, 4, 6, 2, 5, 3, 7, 8, 9, 9 ] ), Transformation( [ 6, 3, 2, 7, 5, 1, 8, 8, 9, 9 ] ) ] gap> GeneratorsOfSemigroup(S); [ Transformation( [ 1, 4, 6, 2, 5, 3, 7, 8, 9, 9 ] ), Transformation( [ 6, 3, 2, 7, 5, 1, 8, 8, 9, 9 ] ) ]
‣ SmallGeneratingSet( coll ) | ( attribute ) |
‣ SmallSemigroupGeneratingSet( coll ) | ( attribute ) |
‣ SmallMonoidGeneratingSet( coll ) | ( attribute ) |
‣ SmallInverseSemigroupGeneratingSet( coll ) | ( attribute ) |
‣ SmallInverseMonoidGeneratingSet( coll ) | ( attribute ) |
Returns: A small generating set for a semigroup.
The attributes SmallXGeneratingSet return a relatively small generating subset of the collection of elements coll, which can also be a semigroup. The returned value of SmallXGeneratingSet, where applicable, has the property that
X(SmallXGeneratingSet(coll)) = X(coll);where X is any of Semigroup (Reference: Semigroup), Monoid (Reference: Monoid), InverseSemigroup (Reference: InverseSemigroup), or InverseMonoid (Reference: InverseMonoid).
If the number of generators for S is already relatively small, then these functions will often return the original generating set. These functions may return different results in different GAP sessions.
SmallGeneratingSet returns the smallest of the returned values of SmallXGeneratingSet which is applicable to coll; see Generators (11.6-1).
As neither irredundancy, nor minimal length are proven, these functions usually return an answer much more quickly than IrredundantGeneratingSubset (11.6-3). These functions can be used whenever a small generating set is desired which does not necessarily needs to be minimal.
gap> S := Semigroup([ > Transformation([1, 2, 3, 2, 4]), > Transformation([1, 5, 4, 3, 2]), > Transformation([2, 1, 4, 2, 2]), > Transformation([2, 4, 4, 2, 1]), > Transformation([3, 1, 4, 3, 2]), > Transformation([3, 2, 3, 4, 1]), > Transformation([4, 4, 3, 3, 5]), > Transformation([5, 1, 5, 5, 3]), > Transformation([5, 4, 3, 5, 2]), > Transformation([5, 5, 4, 5, 5])]);; gap> SmallGeneratingSet(S); [ Transformation( [ 1, 5, 4, 3, 2 ] ), Transformation( [ 3, 2, 3, 4, 1 ] ), Transformation( [ 5, 4, 3, 5, 2 ] ), Transformation( [ 1, 2, 3, 2, 4 ] ), Transformation( [ 4, 4, 3, 3, 5 ] ) ] gap> S := RandomInverseMonoid(IsPartialPermMonoid, 10000, 10);; gap> SmallGeneratingSet(S); [ [ 1 .. 10 ] -> [ 3, 2, 4, 5, 6, 1, 7, 10, 9, 8 ], [ 1 .. 10 ] -> [ 5, 10, 8, 9, 3, 2, 4, 7, 6, 1 ], [ 1, 3, 4, 5, 6, 7, 8, 9, 10 ] -> [ 1, 6, 4, 8, 2, 10, 7, 3, 9 ] ] gap> M := MathieuGroup(24);; gap> mat := List([1 .. 1000], x -> Random(M));; gap> Append(mat, [1 .. 1000] * 0); gap> mat := List([1 .. 138], x -> List([1 .. 57], x -> Random(mat)));; gap> R := ReesZeroMatrixSemigroup(M, mat);; gap> U := Semigroup(List([1 .. 200], x -> Random(R))); <subsemigroup of 57x138 Rees 0-matrix semigroup with 100 generators> gap> Length(SmallGeneratingSet(U)); 84 gap> S := RandomSemigroup(IsBipartitionSemigroup, 100, 4); <bipartition semigroup of degree 4 with 96 generators> gap> Length(SmallGeneratingSet(S)); 13
‣ IrredundantGeneratingSubset( coll ) | ( operation ) |
Returns: A list of irredundant generators.
If coll is a collection of elements of a semigroup, then this function returns a subset U of coll such that no element of U is generated by the other elements of U.
gap> S := Semigroup([ > Transformation([5, 1, 4, 6, 2, 3]), > Transformation([1, 2, 3, 4, 5, 6]), > Transformation([4, 6, 3, 4, 2, 5]), > Transformation([5, 4, 6, 3, 1, 3]), > Transformation([2, 2, 6, 5, 4, 3]), > Transformation([3, 5, 5, 1, 2, 4]), > Transformation([6, 5, 1, 3, 3, 4]), > Transformation([1, 3, 4, 3, 2, 1])]);; gap> IrredundantGeneratingSubset(S); [ Transformation( [ 1, 3, 4, 3, 2, 1 ] ), Transformation( [ 2, 2, 6, 5, 4, 3 ] ), Transformation( [ 3, 5, 5, 1, 2, 4 ] ), Transformation( [ 5, 1, 4, 6, 2, 3 ] ), Transformation( [ 5, 4, 6, 3, 1, 3 ] ), Transformation( [ 6, 5, 1, 3, 3, 4 ] ) ] gap> S := RandomInverseMonoid(IsPartialPermMonoid, 1000, 10); <inverse partial perm monoid of degree 10 with 1000 generators> gap> SmallGeneratingSet(S); [ [ 1 .. 10 ] -> [ 6, 5, 1, 9, 8, 3, 10, 4, 7, 2 ], [ 1 .. 10 ] -> [ 1, 4, 6, 2, 8, 5, 7, 10, 3, 9 ], [ 1, 2, 3, 4, 6, 7, 8, 9 ] -> [ 7, 5, 10, 1, 8, 4, 9, 6 ] [ 1 .. 9 ] -> [ 4, 3, 5, 7, 10, 9, 1, 6, 8 ] ] gap> IrredundantGeneratingSubset(last); [ [ 1 .. 9 ] -> [ 4, 3, 5, 7, 10, 9, 1, 6, 8 ], [ 1 .. 10 ] -> [ 1, 4, 6, 2, 8, 5, 7, 10, 3, 9 ], [ 1 .. 10 ] -> [ 6, 5, 1, 9, 8, 3, 10, 4, 7, 2 ] ] gap> S := RandomSemigroup(IsBipartitionSemigroup, 1000, 4); <bipartition semigroup of degree 4 with 749 generators> gap> SmallGeneratingSet(S); [ <bipartition: [ 1, -3 ], [ 2, -2 ], [ 3, -1 ], [ 4, -4 ]>, <bipartition: [ 1, 3, -2 ], [ 2, -1, -3 ], [ 4, -4 ]>, <bipartition: [ 1, -4 ], [ 2, 4, -1, -3 ], [ 3, -2 ]>, <bipartition: [ 1, -1, -3 ], [ 2, -4 ], [ 3, 4, -2 ]>, <bipartition: [ 1, -2, -4 ], [ 2 ], [ 3, -3 ], [ 4, -1 ]>, <bipartition: [ 1, -2 ], [ 2, -1, -3 ], [ 3, 4, -4 ]>, <bipartition: [ 1, 3, -1 ], [ 2, -3 ], [ 4, -2, -4 ]>, <bipartition: [ 1, -1 ], [ 2, 4, -4 ], [ 3, -2, -3 ]>, <bipartition: [ 1, 3, -1 ], [ 2, -2 ], [ 4, -3, -4 ]>, <bipartition: [ 1, 2, -2 ], [ 3, -1, -4 ], [ 4, -3 ]>, <bipartition: [ 1, -2, -3 ], [ 2, -4 ], [ 3 ], [ 4, -1 ]>, <bipartition: [ 1, -1 ], [ 2, 4, -3 ], [ 3, -2 ], [ -4 ]>, <bipartition: [ 1, -3 ], [ 2, -1 ], [ 3, 4, -4 ], [ -2 ]>, <bipartition: [ 1, 2, -4 ], [ 3, -1 ], [ 4, -2 ], [ -3 ]>, <bipartition: [ 1, -3 ], [ 2, -4 ], [ 3, -1, -2 ], [ 4 ]> ] gap> IrredundantGeneratingSubset(last); [ <bipartition: [ 1, 2, -4 ], [ 3, -1 ], [ 4, -2 ], [ -3 ]>, <bipartition: [ 1, 3, -1 ], [ 2, -2 ], [ 4, -3, -4 ]>, <bipartition: [ 1, 3, -2 ], [ 2, -1, -3 ], [ 4, -4 ]>, <bipartition: [ 1, -1 ], [ 2, 4, -3 ], [ 3, -2 ], [ -4 ]>, <bipartition: [ 1, -3 ], [ 2, -1 ], [ 3, 4, -4 ], [ -2 ]>, <bipartition: [ 1, -3 ], [ 2, -2 ], [ 3, -1 ], [ 4, -4 ]>, <bipartition: [ 1, -3 ], [ 2, -4 ], [ 3, -1, -2 ], [ 4 ]>, <bipartition: [ 1, -2, -3 ], [ 2, -4 ], [ 3 ], [ 4, -1 ]>, <bipartition: [ 1, -2, -4 ], [ 2 ], [ 3, -3 ], [ 4, -1 ]> ]
‣ MinimalSemigroupGeneratingSet( S ) | ( attribute ) |
‣ MinimalMonoidGeneratingSet( S ) | ( attribute ) |
‣ MinimalInverseSemigroupGeneratingSet( S ) | ( attribute ) |
‣ MinimalInverseMonoidGeneratingSet( S ) | ( attribute ) |
Returns: A minimal generating set for a semigroup.
The attribute MinimalXGeneratingSet returns a minimal generating set for the semigroup S, with respect to length. The returned value of MinimalXGeneratingSet, where applicable, is a minimal-length list of elements of S with the property that
X(MinimalXGeneratingSet(S)) = S;
where X is one of Semigroup (Reference: Semigroup), Monoid (Reference: Monoid), InverseSemigroup (Reference: InverseSemigroup), or InverseMonoid (Reference: InverseMonoid).
For many types of semigroup, it is not currently possible to find a MinimalXGeneratingSet with the Semigroups package.
See also SmallGeneratingSet (11.6-2) and IrredundantGeneratingSubset (11.6-3).
gap> S := MonogenicSemigroup(3, 6);; gap> MinimalSemigroupGeneratingSet(S); [ Transformation( [ 2, 3, 4, 5, 6, 1, 6, 7, 8 ] ) ] gap> S := FullTransformationMonoid(4);; gap> MinimalSemigroupGeneratingSet(S); [ Transformation( [ 1, 4, 2, 3 ] ), Transformation( [ 4, 3, 1, 2 ] ), Transformation( [ 1, 2, 3, 1 ] ) ] gap> S := Monoid([ > PartialPerm([2, 3, 4, 5, 1, 0, 6, 7]), > PartialPerm([3, 4, 5, 1, 2, 0, 0, 6])]); <partial perm monoid of rank 8 with 2 generators> gap> IsMonogenicMonoid(S); true gap> MinimalMonoidGeneratingSet(S); [ [8,7,6](1,2,3,4,5) ]
‣ GeneratorsSmallest( S ) | ( attribute ) |
Returns: A set of elements.
For a semigroup S, GeneratorsSmallest returns the lexicographically least set of elements X such that X generates S as a semigroup, and such that X is lexicographically ordered and has the property that each X[i] is not generated by X[1], X[2], ..., X[i-1].
It can be difficult to find the set of generators X, and it might contain a substantial proportion of the elements of S.
Two semigroups have the same set of elements if and only if their smallest generating sets are equal. However, due to the complexity of determining the GeneratorsSmallest, this is not the method used by the Semigroups package when comparing semigroups.
gap> S := Monoid([ > Transformation([1, 3, 4, 1]), > Transformation([2, 4, 1, 2]), > Transformation([3, 1, 1, 3]), > Transformation([3, 3, 4, 1])]); <transformation monoid of degree 4 with 4 generators> gap> GeneratorsSmallest(S); [ Transformation( [ 1, 1, 1, 1 ] ), Transformation( [ 1, 1, 1, 2 ] ), Transformation( [ 1, 1, 1, 3 ] ), Transformation( [ 1, 1, 1 ] ), Transformation( [ 1, 1, 2, 1 ] ), Transformation( [ 1, 1, 2, 2 ] ), Transformation( [ 1, 1, 3, 1 ] ), Transformation( [ 1, 1, 3, 3 ] ), Transformation( [ 1, 1 ] ), Transformation( [ 1, 1, 4, 1 ] ), Transformation( [ 1, 2, 1, 1 ] ), Transformation( [ 1, 2, 2, 1 ] ), IdentityTransformation, Transformation( [ 1, 3, 1, 1 ] ), Transformation( [ 1, 3, 4, 1 ] ), Transformation( [ 2, 1, 1, 2 ] ), Transformation( [ 2, 2, 2 ] ), Transformation( [ 2, 4, 1, 2 ] ), Transformation( [ 3, 3, 3 ] ), Transformation( [ 3, 3, 4, 1 ] ) ] gap> T := Semigroup(Bipartition([[1, 2, 3], [4, -1], [-2], [-3], [-4]]), > Bipartition([[1, -3, -4], [2, 3, 4, -2], [-1]]), > Bipartition([[1, 2, 3, 4, -2], [-1, -4], [-3]]), > Bipartition([[1, 2, 3, 4], [-1], [-2], [-3, -4]]), > Bipartition([[1, 2, -1, -2], [3, 4, -3], [-4]])); <bipartition semigroup of degree 4 with 5 generators> gap> GeneratorsSmallest(T); [ <bipartition: [ 1, 2, 3, 4, -1, -2, -3 ], [ -4 ]>, <bipartition: [ 1, 2, 3, 4, -1, -2 ], [ -3 ], [ -4 ]>, <bipartition: [ 1, 2, 3, 4, -1 ], [ -2 ], [ -3 ], [ -4 ]>, <bipartition: [ 1, 2, 3, 4, -2, -3, -4 ], [ -1 ]>, <bipartition: [ 1, 2, 3, 4, -2 ], [ -1, -4 ], [ -3 ]>, <bipartition: [ 1, 2, 3, 4, -2 ], [ -1 ], [ -3, -4 ]>, <bipartition: [ 1, 2, 3, 4, -3 ], [ -1, -2 ], [ -4 ]>, <bipartition: [ 1, 2, 3, 4 ], [ -1, -2, -3 ], [ -4 ]>, <bipartition: [ 1, 2, 3, 4, -3, -4 ], [ -1 ], [ -2 ]>, <bipartition: [ 1, 2, 3 ], [ 4, -1, -2, -3 ], [ -4 ]>, <bipartition: [ 1, 2, -1, -2 ], [ 3, 4, -3 ], [ -4 ]>, <bipartition: [ 1, -3 ], [ 2, 3, 4, -1, -2 ], [ -4 ]>, <bipartition: [ 1, -3, -4 ], [ 2, 3, 4, -2 ], [ -1 ]> ]
‣ IndecomposableElements( S ) | ( attribute ) |
Returns: A list of elements.
If S is a semigroup, then this attribute returns the set of elements of S that are not decomposable. A element of S is decomposable if it can be written as the product of two elements in S. An element of S is indecomposable if it is not decomposable.
See also IsSurjectiveSemigroup (12.1-6).
Note that any generating set for S contains each indecomposable element of S. Thus IndecomposableElements(S) is a subset of GeneratorsOfSemigroup(S).
gap> S := Semigroup([ > Transformation([1, 1, 2, 3]), > Transformation([1, 1, 1, 2])]); <transformation semigroup of degree 4 with 2 generators> gap> x := IndecomposableElements(S); [ Transformation( [ 1, 1, 2, 3 ] ) ] gap> IsSubset(GeneratorsOfSemigroup(S), x); true gap> T := FullTransformationMonoid(10); <full transformation monoid of degree 10> gap> IndecomposableElements(T); [ ] gap> B := ZeroSemigroup(IsBipartitionSemigroup, 3); <commutative non-regular bipartition semigroup of size 3, degree 4 with 2 generators> gap> IndecomposableElements(B); [ <bipartition: [ 1, 2, 3, -1 ], [ 4, -2 ], [ -3 ], [ -4 ]>, <bipartition: [ 1, 2, 4, -1 ], [ 3, -2 ], [ -3 ], [ -4 ]> ]
In this section we describe the attributes of a semigroup that can be found using the Semigroups package.
‣ MinimalIdeal( S ) | ( attribute ) |
Returns: The minimal ideal of a semigroup.
The minimal ideal of a semigroup is the least ideal with respect to containment.
It is significantly easier to find the minimal D-class of a semigroup, than to find its D-classes.
See also RepresentativeOfMinimalIdeal (11.7-2), PartialOrderOfDClasses (10.1-10), IsGreensLessThanOrEqual (Reference: IsGreensLessThanOrEqual), and MinimalDClass (10.1-6).
gap> S := Semigroup( > Transformation([3, 4, 1, 3, 6, 3, 4, 6, 10, 1]), > Transformation([8, 2, 3, 8, 4, 1, 3, 4, 9, 7]));; gap> MinimalIdeal(S); <simple transformation semigroup ideal of degree 10 with 1 generator> gap> Elements(MinimalIdeal(S)); [ Transformation( [ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 ] ), Transformation( [ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 ] ), Transformation( [ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 ] ), Transformation( [ 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 ] ), Transformation( [ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8 ] ) ] gap> x := Transformation([8, 8, 8, 8, 8, 8, 8, 8, 8, 8]);; gap> D := DClass(S, x);; gap> ForAll(GreensDClasses(S), x -> IsGreensLessThanOrEqual(D, x)); true gap> MinimalIdeal(POI(10)); <partial perm group of rank 0> gap> MinimalIdeal(BrauerMonoid(6)); <simple bipartition *-semigroup ideal of degree 6 with 1 generator>
‣ RepresentativeOfMinimalIdeal( S ) | ( attribute ) |
‣ RepresentativeOfMinimalDClass( S ) | ( attribute ) |
Returns: An element of the minimal ideal of a semigroup.
The minimal ideal of a semigroup is the least ideal with respect to containment.
This method returns a representative element of the minimal ideal of S without having to create the minimal ideal itself. In general, beyond being a member of the minimal ideal, the returned element is not guaranteed to have any special properties. However, the element will coincide with the zero element of S if one exists.
This method works particularly well if S is a semigroup of transformations or partial permutations.
See also MinimalIdeal (11.7-1) and MinimalDClass (10.1-6).
gap> S := SymmetricInverseSemigroup(10);; gap> RepresentativeOfMinimalIdeal(S); <empty partial perm> gap> B := Semigroup([ > Bipartition([[1, 2], [3, 6, -2], [4, 5, -3, -4], [-1, -6], [-5]]), > Bipartition([[1, -1], [2], [3], [4, -3], [5, 6, -5, -6], > [-2, -4]])]);; gap> RepresentativeOfMinimalIdeal(B); <bipartition: [ 1, 2 ], [ 3, 6 ], [ 4, 5 ], [ -1, -5, -6 ], [ -2, -4 ], [ -3 ]> gap> S := Semigroup(Transformation([5, 1, 6, 2, 2, 4]), > Transformation([3, 5, 5, 1, 6, 2]));; gap> RepresentativeOfMinimalDClass(S); Transformation( [ 5, 6, 6, 3, 3, 5 ] ) gap> MinimalDClass(S); <Green's D-class: Transformation( [ 5, 6, 6, 3, 3, 5 ] )>
‣ MultiplicativeZero( S ) | ( attribute ) |
Returns: The zero element of a semigroup.
MultiplicativeZero returns the zero element of the semigroup S if it exists and fail if it does not. See also MultiplicativeZero (Reference: MultiplicativeZero).
gap> S := Semigroup(Transformation([1, 4, 2, 6, 6, 5, 2]), > Transformation([1, 6, 3, 6, 2, 1, 6]));; gap> MultiplicativeZero(S); Transformation( [ 1, 1, 1, 1, 1, 1, 1 ] ) gap> S := Semigroup(Transformation([2, 8, 3, 7, 1, 5, 2, 6]), > Transformation([3, 5, 7, 2, 5, 6, 3, 8]), > Transformation([6, 7, 4, 1, 4, 1, 6, 2]), > Transformation([8, 8, 5, 1, 7, 5, 2, 8]));; gap> MultiplicativeZero(S); fail gap> S := InverseSemigroup( > PartialPerm([1, 3, 4], [5, 3, 1]), > PartialPerm([1, 2, 3, 4], [4, 3, 1, 2]), > PartialPerm([1, 3, 4, 5], [2, 4, 5, 3]));; gap> MultiplicativeZero(S); <empty partial perm> gap> S := PartitionMonoid(6); <regular bipartition *-monoid of size 4213597, degree 6 with 4 generators> gap> MultiplicativeZero(S); fail gap> S := DualSymmetricInverseMonoid(6); <inverse block bijection monoid of degree 6 with 3 generators> gap> MultiplicativeZero(S); <block bijection: [ 1, 2, 3, 4, 5, 6, -1, -2, -3, -4, -5, -6 ]>
‣ UnderlyingSemigroupOfSemigroupWithAdjoinedZero( S ) | ( attribute ) |
Returns: A semigroup, or fail.
If S is a semigroup for which the property IsSemigroupWithAdjoinedZero (12.1-20) is true, (i.e. S has a MultiplicativeZero (11.7-3) and the set S ∖ { 0 } is a subsemigroup of S), then this method returns the semigroup S ∖ { 0 }.
Otherwise, if S is a semigroup for which the property IsSemigroupWithAdjoinedZero (12.1-20) is false, then this method returns fail.
gap> S := Semigroup([ > Transformation([2, 3, 4, 5, 1, 6]), > Transformation([2, 1, 3, 4, 5, 6]), > Transformation([6, 6, 6, 6, 6, 6])]); <transformation semigroup of degree 6 with 3 generators> gap> MultiplicativeZero(S); Transformation( [ 6, 6, 6, 6, 6, 6 ] ) gap> G := UnderlyingSemigroupOfSemigroupWithAdjoinedZero(S); <transformation semigroup of degree 5 with 2 generators> gap> IsGroupAsSemigroup(G); true gap> IsZeroGroup(S); true gap> S := SymmetricInverseMonoid(6);; gap> MultiplicativeZero(S); <empty partial perm> gap> G := UnderlyingSemigroupOfSemigroupWithAdjoinedZero(S); fail
‣ GroupOfUnits( S ) | ( attribute ) |
Returns: The group of units of a semigroup or fail.
GroupOfUnits returns the group of units of the semigroup S as a subsemigroup of S if it exists and returns fail if it does not. Use IsomorphismPermGroup (6.5-5) if you require a permutation representation of the group of units.
If a semigroup S has an identity e, then the group of units of S is the set of those s in S such that there exists t in S where s*t=t*s=e. Equivalently, the group of units is the H-class of the identity of S.
See also GreensHClassOfElement (Reference: GreensHClassOfElement), IsMonoidAsSemigroup (12.1-13), and MultiplicativeNeutralElement (Reference: MultiplicativeNeutralElement).
gap> S := Semigroup( > Transformation([1, 2, 5, 4, 3, 8, 7, 6]), > Transformation([1, 6, 3, 4, 7, 2, 5, 8]), > Transformation([2, 1, 6, 7, 8, 3, 4, 5]), > Transformation([3, 2, 3, 6, 1, 6, 1, 2]), > Transformation([5, 2, 3, 6, 3, 4, 7, 4]));; gap> Size(S); 5304 gap> StructureDescription(GroupOfUnits(S)); "C2 x S4" gap> S := InverseSemigroup( > PartialPerm([1, 2, 3, 4, 5, 6, 7, 8, 9, 10], > [2, 4, 5, 3, 6, 7, 10, 9, 8, 1]), > PartialPerm([1, 2, 3, 4, 5, 6, 7, 8, 10], > [8, 2, 3, 1, 4, 5, 10, 6, 9]));; gap> StructureDescription(GroupOfUnits(S)); "C8" gap> S := InverseSemigroup( > PartialPerm([1, 3, 4], [4, 3, 5]), > PartialPerm([1, 2, 3, 5], [3, 1, 5, 2]));; gap> GroupOfUnits(S); fail gap> S := Semigroup( > Bipartition([[1, 2, 3, -1, -3], [-2]]), > Bipartition([[1, -1], [2, 3, -2, -3]]), > Bipartition([[1, -2], [2, -3], [3, -1]]), > Bipartition([[1], [2, 3, -2], [-1, -3]]));; gap> StructureDescription(GroupOfUnits(S)); "C3"
‣ Idempotents( obj[, n] ) | ( attribute ) |
Returns: A list of idempotents.
The argument obj should be a semigroup, D-class, H-class, L-class, or R-class.
If the optional second argument n is present and obj is a semigroup, then a list of the idempotents in obj of rank n is returned. If you are only interested in the idempotents of a given rank, then the second version of the function will probably be faster. However, if the optional second argument is present, then nothing is stored in obj and so every time the function is called the computation must be repeated.
This functions produce essentially the same output as the GAP library function with the same name; see Idempotents (Reference: Idempotents). The main difference is that this function can be applied to a wider class of objects as described above.
See also IsRegularDClass (Reference: IsRegularDClass), IsRegularGreensClass (10.3-2) IsGroupHClass (Reference: IsGroupHClass), NrIdempotents (11.9-2), and GroupHClass (10.4-1).
gap> S := Semigroup(Transformation([2, 3, 4, 1]), > Transformation([3, 3, 1, 1]));; gap> Idempotents(S, 1); [ ] gap> AsSet(Idempotents(S, 2)); [ Transformation( [ 1, 1, 3, 3 ] ), Transformation( [ 1, 3, 3, 1 ] ), Transformation( [ 2, 2, 4, 4 ] ), Transformation( [ 4, 2, 2, 4 ] ) ] gap> AsSet(Idempotents(S)); [ Transformation( [ 1, 1, 3, 3 ] ), IdentityTransformation, Transformation( [ 1, 3, 3, 1 ] ), Transformation( [ 2, 2, 4, 4 ] ), Transformation( [ 4, 2, 2, 4 ] ) ] gap> x := Transformation([2, 2, 4, 4]);; gap> R := GreensRClassOfElement(S, x);; gap> Idempotents(R); [ Transformation( [ 1, 1, 3, 3 ] ), Transformation( [ 2, 2, 4, 4 ] ) ] gap> x := Transformation([4, 2, 2, 4]);; gap> L := GreensLClassOfElement(S, x);; gap> AsSet(Idempotents(L)); [ Transformation( [ 2, 2, 4, 4 ] ), Transformation( [ 4, 2, 2, 4 ] ) ] gap> D := DClassOfLClass(L);; gap> AsSet(Idempotents(D)); [ Transformation( [ 1, 1, 3, 3 ] ), Transformation( [ 1, 3, 3, 1 ] ), Transformation( [ 2, 2, 4, 4 ] ), Transformation( [ 4, 2, 2, 4 ] ) ] gap> L := GreensLClassOfElement(S, Transformation([3, 1, 1, 3]));; gap> AsSet(Idempotents(L)); [ Transformation( [ 1, 1, 3, 3 ] ), Transformation( [ 1, 3, 3, 1 ] ) ] gap> H := GroupHClass(D); <Green's H-class: Transformation( [ 1, 1, 3, 3 ] )> gap> Idempotents(H); [ Transformation( [ 1, 1, 3, 3 ] ) ] gap> S := InverseSemigroup( > PartialPerm([10, 6, 3, 4, 9, 0, 1]), > PartialPerm([6, 10, 7, 4, 8, 2, 9, 1]));; gap> Idempotents(S, 1); [ <identity partial perm on [ 4 ]> ] gap> Idempotents(S, 0); [ ]
‣ NrIdempotents( obj ) | ( attribute ) |
Returns: A positive integer.
This function returns the number of idempotents in obj where obj can be a semigroup, D-, L-, H-, or R-class. If the actual idempotents are not required, then it is more efficient to use NrIdempotents(obj) than Length(Idempotents(obj)) since the idempotents themselves are not created when NrIdempotents is called.
See also Idempotents (Reference: Idempotents) and Idempotents (11.9-1), IsRegularDClass (Reference: IsRegularDClass), IsRegularGreensClass (10.3-2) IsGroupHClass (Reference: IsGroupHClass), and GroupHClass (10.4-1).
gap> S := Semigroup(Transformation([2, 3, 4, 1]), > Transformation([3, 3, 1, 1]));; gap> NrIdempotents(S); 5 gap> f := Transformation([2, 2, 4, 4]);; gap> R := GreensRClassOfElement(S, f);; gap> NrIdempotents(R); 2 gap> f := Transformation([4, 2, 2, 4]);; gap> L := GreensLClassOfElement(S, f);; gap> NrIdempotents(L); 2 gap> D := DClassOfLClass(L);; gap> NrIdempotents(D); 4 gap> L := GreensLClassOfElement(S, Transformation([3, 1, 1, 3]));; gap> NrIdempotents(L); 2 gap> H := GroupHClass(D);; gap> NrIdempotents(H); 1 gap> S := InverseSemigroup( > PartialPerm([1, 2, 3, 5, 7, 9, 10], > [6, 7, 2, 9, 1, 5, 3]), > PartialPerm([1, 2, 3, 5, 6, 7, 9, 10], > [8, 1, 9, 4, 10, 5, 6, 7]));; gap> NrIdempotents(S); 236 gap> f := PartialPerm([2, 3, 7, 9, 10], > [7, 2, 1, 5, 3]);; gap> D := DClassNC(S, f);; gap> NrIdempotents(D); 13
‣ IdempotentGeneratedSubsemigroup( S ) | ( attribute ) |
Returns: A semigroup.
IdempotentGeneratedSubsemigroup returns the subsemigroup of the semigroup S generated by the idempotents of S.
See also Idempotents (11.9-1) and SmallGeneratingSet (11.6-2).
gap> S := Semigroup(Transformation([1, 1]), > Transformation([2, 1]), > Transformation([1, 2, 2]), > Transformation([1, 2, 3, 4, 5, 1]), > Transformation([1, 2, 3, 4, 5, 5]), > Transformation([1, 2, 3, 4, 6, 5]), > Transformation([1, 2, 3, 5, 4]), > Transformation([1, 2, 3, 7, 4, 5, 7]), > Transformation([1, 2, 4, 8, 8, 3, 8, 7]), > Transformation([1, 2, 8, 4, 5, 6, 7, 8]), > Transformation([7, 7, 7, 4, 5, 6, 1]));; gap> IdempotentGeneratedSubsemigroup(S) = > Monoid(Transformation([1, 1]), > Transformation([1, 2, 1]), > Transformation([1, 2, 2]), > Transformation([1, 2, 3, 1]), > Transformation([1, 2, 3, 2]), > Transformation([1, 2, 3, 4, 1]), > Transformation([1, 2, 3, 4, 2]), > Transformation([1, 2, 3, 4, 4]), > Transformation([1, 2, 3, 4, 5, 1]), > Transformation([1, 2, 3, 4, 5, 2]), > Transformation([1, 2, 3, 4, 5, 5]), > Transformation([1, 2, 3, 4, 5, 7, 7]), > Transformation([1, 2, 3, 4, 7, 6, 7]), > Transformation([1, 2, 3, 6, 5, 6]), > Transformation([1, 2, 3, 7, 5, 6, 7]), > Transformation([1, 2, 8, 4, 5, 6, 7, 8]), > Transformation([2, 2])); true gap> S := SymmetricInverseSemigroup(5); <symmetric inverse monoid of degree 5> gap> IdempotentGeneratedSubsemigroup(S); <inverse partial perm monoid of rank 5 with 5 generators> gap> S := DualSymmetricInverseSemigroup(5); <inverse block bijection monoid of degree 5 with 3 generators> gap> IdempotentGeneratedSubsemigroup(S); <inverse block bijection monoid of degree 5 with 10 generators> gap> IsSemilattice(last); true
The Semigroups package provides methods to calculate the maximal subsemigroups of a finite semigroup, subject to various conditions. A maximal subsemigroup of a semigroup is a proper subsemigroup that is contained in no other proper subsemigroup of the semigroup.
When computing the maximal subsemigroups of a regular Rees (0-)matrix semigroup over a group, additional functionality is available. As described in [GGR68], a maximal subsemigroup of a finite regular Rees (0-)matrix semigroup over a group is one of 6 possible types. Using the Semigroups package, it is possible to search for only those maximal subsemigroups of certain types.
A maximal subsemigroup of such a Rees (0-)matrix semigroup R over a group G is either:
{0};
formed by removing 0;
formed by removing a column (a non-zero L-class);
formed by removing a row (a non-zero R-class);
formed by removing a set of both rows and columns;
isomorphic to a Rees (0-)matrix semigroup of the same dimensions over a maximal subgroup of G (in particular, the maximal subsemigroup intersects every H-class of R).
Note that if R is a Rees matrix semigroup then it has no maximal subsemigroups of types 1, 2, or 5. Only types 3, 4, and 6 are relevant to a Rees matrix semigroup.
‣ MaximalSubsemigroups( S ) | ( attribute ) |
‣ MaximalSubsemigroups( S, opts ) | ( operation ) |
Returns: The maximal subsemigroups of S.
If S is a finite semigroup, then the attribute MaximalSubsemigroups returns a list of the non-empty maximal subsemigroups of S. The methods used by MaximalSubsemigroups are based on [GGR68], and are described in [DMW18].
It is computationally expensive to search for the maximal subsemigroups of a semigroup, and so computations involving MaximalSubsemigroups may be very lengthy. A substantial amount of information on the progress of MaximalSubsemigroups is provided through the info class InfoSemigroups (2.5-1), with increasingly detailed information given at levels 1, 2, and 3.
The behaviour of MaximalSubsemigroups can be altered via the second argument opts, which should be a record. The optional components of opts are:
If opts.gens is false or unspecified, then the maximal subsemigroups themselves are returned and not just generating sets for these subsemigroups.
It can be more computationally expensive to return the generating sets for the maximal subsemigroups, than to return the maximal subsemigroups themselves.
If opts.contain is duplicate-free list of elements of S, then MaximalSubsemigroups will search for the maximal subsemigroups of S which contain those elements.
For a maximal subsemigroup M of a finite semigroup S, there exists a unique D-class which contains the complement of M in S. In other words, the elements of S which M lacks are contained in a unique D-class.
If opts.D is a D-class of S, then MaximalSubsemigroups will search exclusively for those maximal subsemigroups of S whose complement is contained in opts.D.
This option is relevant only if S is a regular Rees (0-)matrix semigroup over a group.
As described at the start of this subsection, 11.10, a maximal subsemigroup of a regular Rees (0-)matrix semigroup over a group is one of 6 possible types.
If S is a regular Rees (0-)matrix semigroup over a group and opts.types is a subset of [1 .. 6], then MaximalSubsemigroups will search for those maximal subsemigroups of S of the types enumerated by opts.types.
The default value for this option is [1 .. 6] (i.e. no restriction).
gap> S := FullTransformationSemigroup(3); <full transformation monoid of degree 3> gap> MaximalSubsemigroups(S); [ <transformation semigroup of degree 3 with 7 generators>, <transformation semigroup of degree 3 with 7 generators>, <transformation semigroup of degree 3 with 7 generators>, <transformation semigroup of degree 3 with 7 generators>, <transformation monoid of degree 3 with 5 generators> ] gap> MaximalSubsemigroups(S, > rec(gens := true, D := DClass(S, Transformation([2, 2, 3])))); [ [ Transformation( [ 1, 1, 1 ] ), Transformation( [ 3, 3, 3 ] ), Transformation( [ 2, 2, 2 ] ), IdentityTransformation, Transformation( [ 2, 3, 1 ] ), Transformation( [ 2, 1 ] ) ] ] gap> MaximalSubsemigroups(S, > rec(contain := [Transformation([2, 3, 1])])); [ <transformation semigroup of degree 3 with 7 generators>, <transformation monoid of degree 3 with 5 generators> ] gap> R := PrincipalFactor( > DClass(FullTransformationMonoid(4), Transformation([2, 2]))); <Rees 0-matrix semigroup 6x4 over Group([ (2,3,4), (2,4) ])> gap> MaximalSubsemigroups(R, rec(types := [5], > contain := [RMSElement(R, 1, (), 1), > RMSElement(R, 1, (2, 3), 2)])); [ <subsemigroup of 6x4 Rees 0-matrix semigroup with 10 generators>, <subsemigroup of 6x4 Rees 0-matrix semigroup with 10 generators>, <subsemigroup of 6x4 Rees 0-matrix semigroup with 10 generators>, <subsemigroup of 6x4 Rees 0-matrix semigroup with 10 generators> ]
‣ NrMaximalSubsemigroups( S ) | ( attribute ) |
Returns: The number of maximal subsemigroups of S.
If S is a finite semigroup, then NrMaximalSubsemigroups returns the number of non-empty maximal subsemigroups of S. The methods used by MaximalSubsemigroups are based on [GGR68], and are described in [DMW18].
It can be significantly faster to find the number of maximal subsemigroups of a semigroup than to find the maximal subsemigroups themselves.
Unless the maximal subsemigroups of S are already known, the command NrMaximalSubsemigroups(S) simply calls the command MaximalSubsemigroups(S, rec(number := true)).
For more information about searching for maximal subsemigroups of a finite semigroup in the Semigroups package, and for information about the options available to alter the search, see MaximalSubsemigroups (11.10-1). By supplying the additional option opts.number := true, the number of maximal subsemigroups will be returned rather than the subsemigroups themselves.
gap> S := FullTransformationSemigroup(3); <full transformation monoid of degree 3> gap> NrMaximalSubsemigroups(S); 5 gap> S := RectangularBand(3, 4);; gap> NrMaximalSubsemigroups(S); 7 gap> R := PrincipalFactor( > DClass(FullTransformationMonoid(4), Transformation([2, 2]))); <Rees 0-matrix semigroup 6x4 over Group([ (2,3,4), (2,4) ])> gap> MaximalSubsemigroups(R, rec(number := true, types := [3, 4])); 10
‣ IsMaximalSubsemigroup( S, T ) | ( operation ) |
Returns: true or false.
If S and T are semigroups, then IsMaximalSubsemigroup returns true if and only if T is a maximal subsemigroup of S.
A maximal subsemigroup of S is a proper subsemigroup of S which is contained in no other proper subsemigroup of S.
gap> S := ZeroSemigroup(2);; gap> IsMaximalSubsemigroup(S, Semigroup(MultiplicativeZero(S))); true gap> S := FullTransformationSemigroup(4); <full transformation monoid of degree 4> gap> T := Semigroup(Transformation([3, 4, 1, 2]), > Transformation([1, 4, 2, 3]), > Transformation([2, 1, 1, 3])); <transformation semigroup of degree 4 with 3 generators> gap> IsMaximalSubsemigroup(S, T); true gap> R := Semigroup(Transformation([3, 4, 1, 2]), > Transformation([1, 4, 2, 2]), > Transformation([2, 1, 1, 3])); <transformation semigroup of degree 4 with 3 generators> gap> IsMaximalSubsemigroup(S, R); false
‣ ComponentRepsOfTransformationSemigroup( S ) | ( attribute ) |
Returns: The representatives of components of a transformation semigroup.
This function returns the representatives of the components of the action of the transformation semigroup S on the set of positive integers not greater than the degree of S.
The representatives are the least set of points such that every point can be reached from some representative under the action of S.
gap> S := Semigroup( > Transformation([11, 11, 9, 6, 4, 1, 4, 1, 6, 7, 12, 5]), > Transformation([12, 10, 7, 10, 4, 1, 12, 9, 11, 9, 1, 12]));; gap> ComponentRepsOfTransformationSemigroup(S); [ 2, 3, 8 ]
‣ ComponentsOfTransformationSemigroup( S ) | ( attribute ) |
Returns: The components of a transformation semigroup.
This function returns the components of the action of the transformation semigroup S on the set of positive integers not greater than the degree of S; the components of S partition this set.
gap> S := Semigroup( > Transformation([11, 11, 9, 6, 4, 1, 4, 1, 6, 7, 12, 5]), > Transformation([12, 10, 7, 10, 4, 1, 12, 9, 11, 9, 1, 12]));; gap> ComponentsOfTransformationSemigroup(S); [ [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 ] ]
‣ CyclesOfTransformationSemigroup( S ) | ( attribute ) |
Returns: The cycles of a transformation semigroup.
This function returns the cycles, or strongly connected components, of the action of the transformation semigroup S on the set of positive integers not greater than the degree of S.
gap> S := Semigroup( > Transformation([11, 11, 9, 6, 4, 1, 4, 1, 6, 7, 12, 5]), > Transformation([12, 10, 7, 10, 4, 1, 12, 9, 11, 9, 1, 12]));; gap> CyclesOfTransformationSemigroup(S); [ [ 1, 11, 12, 5, 4, 6, 10, 7, 9 ], [ 2 ], [ 3 ], [ 8 ] ]
‣ DigraphOfAction( S, list, act ) | ( operation ) |
Returns: A digraph, or fail.
If S is a transformation semigroup and list is list such that S acts on the items in list via the function act, then DigraphOfAction returns a digraph representing the action of S on the items in list and any further items output by act(list[i], S.j).
If act(list[i], S.j) is the k-th item in list, then in the output digraph there is an edge from the vertex i to the vertex k labelled by j.
The values in list and the additional values generated are stored in the vertex labels of the output digraph; see DigraphVertexLabels (Digraphs: DigraphVertexLabels), and the edge labels are stored in the DigraphEdgeLabels (Digraphs: DigraphEdgeLabels)
The digraph returned by DigraphOfAction has no multiple edges; see IsMultiDigraph (Digraphs: IsMultiDigraph).
gap> S := Semigroup(Transformation([2, 4, 3, 4, 7, 1, 6]), > Transformation([3, 3, 2, 3, 5, 1, 5])); <transformation semigroup of degree 7 with 2 generators> gap> list := Concatenation(List([1 .. 7], x -> [x]), > Combinations([1 .. 7], 2)); [ [ 1 ], [ 2 ], [ 3 ], [ 4 ], [ 5 ], [ 6 ], [ 7 ], [ 1, 2 ], [ 1, 3 ], [ 1, 4 ], [ 1, 5 ], [ 1, 6 ], [ 1, 7 ], [ 2, 3 ], [ 2, 4 ], [ 2, 5 ], [ 2, 6 ], [ 2, 7 ], [ 3, 4 ], [ 3, 5 ], [ 3, 6 ], [ 3, 7 ], [ 4, 5 ], [ 4, 6 ], [ 4, 7 ], [ 5, 6 ], [ 5, 7 ], [ 6, 7 ] ] gap> D := DigraphOfAction(S, list, OnSets); <immutable digraph with 28 vertices, 54 edges> gap> OnSets([2, 5], S.1); [ 4, 7 ] gap> Position(DigraphVertexLabels(D), [2, 5]); 16 gap> DigraphVertexLabel(D, 25); [ 4, 7 ] gap> DigraphEdgeLabel(D, 16, 25); 1
‣ DigraphOfActionOnPoints( S ) | ( attribute ) |
‣ DigraphOfActionOnPoints( S, n ) | ( attribute ) |
Returns: A digraph.
If S is a transformation semigroup and n is a non-negative integer, then DigraphOfActionOnPoints(S, n) returns a digraph representing the OnPoints (Reference: OnPoints) action of S on the set [1 .. n].
If the optional argument n is not specified, then by default the degree of S will be chosen for n; see DegreeOfTransformationSemigroup (Reference: DegreeOfTransformationSemigroup).
The digraph returned by DigraphOfActionOnPoints has n vertices, where the vertex i corresponds to the point i. For each point i in [1 .. n], and for each generator f in GeneratorsOfSemigroup(S), there is an edge from the vertex i to the vertex i ^ f. See GeneratorsOfSemigroup (Reference: GeneratorsOfSemigroup) for further information.
gap> S := Semigroup(Transformation([2, 4, 2, 4, 7, 1, 6]), > Transformation([3, 3, 2, 3, 5, 1, 5])); <transformation semigroup of degree 7 with 2 generators> gap> D1 := DigraphOfActionOnPoints(S); <immutable digraph with 7 vertices, 12 edges> gap> OnPoints(2, S.1); 4 gap> D2 := DigraphOfActionOnPoints(S, 4); <immutable digraph with 4 vertices, 7 edges> gap> D2 = InducedSubdigraph(D1, [1 .. 4]); true gap> DigraphOfActionOnPoints(S, 5); <immutable digraph with 5 vertices, 8 edges>
‣ FixedPointsOfTransformationSemigroup( S ) | ( attribute ) |
Returns: A set of positive integers.
If S is a transformation semigroup, then FixedPointsOfTransformationSemigroup(S) returns the set of points i in [1 .. DegreeOfTransformationSemigroup(S)] such that i ^ f = i for all f in S.
gap> f := Transformation([1, 4, 2, 4, 3, 7, 7]); Transformation( [ 1, 4, 2, 4, 3, 7, 7 ] ) gap> S := Semigroup(f); <commutative transformation semigroup of degree 7 with 1 generator> gap> FixedPointsOfTransformationSemigroup(S); [ 1, 4, 7 ]
‣ IsTransitive( S[, X] ) | ( property ) |
‣ IsTransitive( S[, n] ) | ( property ) |
Returns: true or false.
A transformation semigroup S is transitive or strongly connected on the set X if for every i, j in X there is an element s in S such that i ^ s = j.
If the optional second argument is a positive integer n, then IsTransitive returns true if S is transitive on [1 .. n], and false if it is not.
If the optional second argument is not provided, then the degree of S is used by default; see DegreeOfTransformationSemigroup (Reference: DegreeOfTransformationSemigroup).
gap> S := Semigroup([ > Bipartition([ > [1, 2], [3, 6, -2], [4, 5, -3, -4], [-1, -6], [-5]]), > Bipartition([ > [1, -4], [2, 3, 4, 5], [6], [-1, -6], [-2, -3], [-5]])]); <bipartition semigroup of degree 6 with 2 generators> gap> AsSemigroup(IsTransformationSemigroup, S); <transformation semigroup of size 11, degree 12 with 2 generators> gap> IsTransitive(last); false gap> IsTransitive(AsSemigroup(Group((1, 2, 3)))); true
‣ SmallestElementSemigroup( S ) | ( attribute ) |
‣ LargestElementSemigroup( S ) | ( attribute ) |
Returns: A transformation.
These attributes return the smallest and largest element of the transformation semigroup S, respectively. Smallest means the first element in the sorted set of elements of S and largest means the last element in the set of elements.
It is not necessary to find the elements of the semigroup to determine the smallest or largest element, and this function has considerable better performance than the equivalent Elements(S)[1] and Elements(S)[Size(S)].
gap> S := Monoid( > Transformation([1, 4, 11, 11, 7, 2, 6, 2, 5, 5, 10]), > Transformation([2, 4, 4, 2, 10, 5, 11, 11, 11, 6, 7])); <transformation monoid of degree 11 with 2 generators> gap> SmallestElementSemigroup(S); IdentityTransformation gap> LargestElementSemigroup(S); Transformation( [ 11, 11, 10, 10, 7, 6, 5, 6, 2, 2, 4 ] )
‣ CanonicalTransformation( trans[, n] ) | ( function ) |
Returns: A transformation.
If trans is a transformation, and n is a non-negative integer such that the restriction of trans to [1 .. n] defines a transformation of [1 .. n], then CanonicalTransformation returns a canonical representative of the transformation trans restricted to [1 .. n].
More specifically, let C(n) be a class of transformations of degree n such that AsDigraph returns isomorphic digraphs for every pair of element elements in C(n). Recall that for a transformation trans and integer n the function AsDigraph returns a digraph with n vertices and an edge with source x and range x^trans for every x in [1 .. n]. See AsDigraph (Digraphs: AsDigraph for a binary relation). Then CanonicalTransformation returns a canonical representative of the class C(n) that contains trans.
gap> x := Transformation([5, 1, 4, 1, 1]); Transformation( [ 5, 1, 4, 1, 1 ] ) gap> y := Transformation([3, 3, 2, 3, 1]); Transformation( [ 3, 3, 2, 3, 1 ] ) gap> CanonicalTransformation(x); Transformation( [ 3, 5, 2, 2, 2 ] ) gap> CanonicalTransformation(y); Transformation( [ 3, 5, 2, 2, 2 ] )
‣ IsConnectedTransformationSemigroup( S ) | ( property ) |
Returns: true or false.
A transformation semigroup S is connected if the digraph returned by the function DigraphOfActionOnPoints is connected. See IsConnectedDigraph (Digraphs: IsConnectedDigraph) and DigraphOfActionOnPoints (11.11-5). The function IsConnectedTransformationSemigroup returns true if the semigroup S is connected and false otherwise.
gap> S := Semigroup([ > Transformation([2, 4, 3, 4]), > Transformation([3, 3, 2, 3, 3])]); <transformation semigroup of degree 5 with 2 generators> gap> IsConnectedTransformationSemigroup(S); true
‣ ComponentRepsOfPartialPermSemigroup( S ) | ( attribute ) |
Returns: The representatives of components of a partial perm semigroup.
This function returns the representatives of the components of the action of the partial perm semigroup S on the set of positive integers where it is defined.
The representatives are the least set of points such that every point can be reached from some representative under the action of S.
gap> S := Semigroup([ > PartialPerm([1, 2, 3, 5, 6, 7, 8, 11, 12, 16, 19], > [9, 18, 20, 11, 5, 16, 8, 19, 14, 13, 1]), > PartialPerm([1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 14, 16, 18, 19, 20], > [13, 1, 8, 5, 4, 14, 11, 12, 9, 20, 2, 18, 7, 3, 19])]);; gap> ComponentRepsOfPartialPermSemigroup(S); [ 6, 10, 15, 17 ]
‣ ComponentsOfPartialPermSemigroup( S ) | ( attribute ) |
Returns: The components of a partial perm semigroup.
This function returns the components of the action of the partial perm semigroup S on the set of positive integers where it is defined; the components of S partition this set.
gap> S := Semigroup([ > PartialPerm([1, 2, 3, 5, 6, 7, 8, 11, 12, 16, 19], > [9, 18, 20, 11, 5, 16, 8, 19, 14, 13, 1]), > PartialPerm([1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 14, 16, 18, 19, 20], > [13, 1, 8, 5, 4, 14, 11, 12, 9, 20, 2, 18, 7, 3, 19])]);; gap> ComponentsOfPartialPermSemigroup(S); [ [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 18, 19, 20 ], [ 15 ], [ 17 ] ]
‣ CyclesOfPartialPerm( x ) | ( attribute ) |
Returns: The cycles of a partial perm.
This function returns the cycles, or strongly connected components, of the action of the partial perm x on the set of positive integers where it is defined.
gap> x := PartialPerm([3, 1, 4, 2, 5, 0, 0, 6, 0, 7]); [8,6][10,7](1,3,4,2)(5) gap> CyclesOfPartialPerm(x); [ [ 5 ], [ 1, 3, 4, 2 ] ]
‣ CyclesOfPartialPermSemigroup( S ) | ( attribute ) |
Returns: The cycles of a partial perm semigroup.
This function returns the cycles, or strongly connected components, of the action of the partial perm semigroup S on the set of positive integers where it is defined.
gap> S := Semigroup([ > PartialPerm([1, 2, 3, 5, 6, 7, 8, 11, 12, 16, 19], > [9, 18, 20, 11, 5, 16, 8, 19, 14, 13, 1]), > PartialPerm([1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 14, 16, 18, 19, 20], > [13, 1, 8, 5, 4, 14, 11, 12, 9, 20, 2, 18, 7, 3, 19])]);; gap> CyclesOfPartialPermSemigroup(S); [ [ 18, 7, 16 ], [ 1, 9, 12, 14, 2, 20, 19, 3, 8, 11 ], [ 4, 5 ] ]
‣ RZMSDigraph( R ) | ( attribute ) |
Returns: A digraph.
If R is an n by m Rees 0-matrix semigroup M^0[I, T, Λ; P] (so that I = {1,2,...,n} and Λ = {1,2,...,m}) then RZMSDigraph returns a symmetric bipartite digraph with n+m vertices. An index i ∈ I corresponds to the vertex i and an index j ∈ Λ corresponds to the vertex j + n.
Two vertices v and w in RZMSDigraph(R) are adjacent if and only if v∈ I, w - n∈ Λ, and P[w - n][v] ≠ 0.
This digraph is commonly called the Graham-Houghton graph of R.
gap> R := PrincipalFactor( > DClass(FullTransformationMonoid(5), > Transformation([2, 4, 1, 5, 5]))); <Rees 0-matrix semigroup 10x5 over Group([ (1,2,3,4), (1,2) ])> gap> gr := RZMSDigraph(R); <immutable bipartite digraph with bicomponent sizes 10 and 5> gap> e := DigraphEdges(gr)[1]; [ 1, 11 ] gap> Matrix(R)[e[2] - 10][e[1]] <> 0; true
‣ RZMSConnectedComponents( R ) | ( attribute ) |
Returns: The connected components of a Rees 0-matrix semigroup.
If R is an n by m Rees 0-matrix semigroup M^0[I, T, Λ; P] (so that I = {1,2,...,n} and Λ = {1,2,...,m}) then RZMSConnectedComponents returns the connected components of R.
Connectedness is an equivalence relation on the indices of R: the equivalence classes of the relation are called the connected components of R, and two indices in I ∪ Λ are connected if and only if their corresponding vertices in RZMSDigraph(R) are connected (see RZMSDigraph (11.13-1)). If R has n connected components, then RZMSConnectedComponents will return a list of pairs:
[ [ I_1, Λ_1 ], ..., [ I_k, Λ_k ] ]
where I = I_1 ⊔ ⋯ ⊔ I_k, Λ = Λ_1 ⊔ ⋯ ⊔ Λ_k, and for each l the set I_l∪Λ_l is a connected component of R. Note that at most one of I_l and Λ_l is possibly empty. The ordering of the connected components in the result in unspecified.
gap> R := ReesZeroMatrixSemigroup(SymmetricGroup(5), > [[(), 0, (1, 3), (4, 5), 0], > [0, (), 0, 0, (1, 3, 4, 5)], > [0, 0, (1, 5)(2, 3), 0, 0], > [0, (2, 3)(1, 4), 0, 0, 0]]); <Rees 0-matrix semigroup 5x4 over Sym( [ 1 .. 5 ] )> gap> RZMSConnectedComponents(R); [ [ [ 1, 3, 4 ], [ 1, 3 ] ], [ [ 2, 5 ], [ 2, 4 ] ] ]
‣ NaturalLeqInverseSemigroup( S ) | ( attribute ) |
Returns: An function.
NaturalLeqInverseSemigroup returns a function that, when given two elements x, y of the inverse semigroup S, returns true if x is less than or equal to y in the natural partial order on S.
gap> S := Monoid(Transformation([1, 3, 4, 4]), > Transformation([1, 4, 2, 4])); <transformation monoid of degree 4 with 2 generators> gap> IsInverseSemigroup(S); true gap> Size(S); 6 gap> NaturalPartialOrder(S); [ [ 2, 5, 6 ], [ 6 ], [ 6 ], [ 6 ], [ 6 ], [ ] ]
‣ JoinIrreducibleDClasses( S ) | ( attribute ) |
Returns: A list of D-classes.
JoinIrreducibleDClasses returns a list of the join irreducible D-classes of the inverse semigroup of partial permutations, block bijections or partial permutation bipartitions S.
A join irreducible D-class is a D-class containing only join irreducible elements. See IsJoinIrreducible (12.2-7). If a D-class contains one join irreducible element, then all of the elements in the D-class are join irreducible.
gap> S := SymmetricInverseSemigroup(3); <symmetric inverse monoid of degree 3> gap> JoinIrreducibleDClasses(S); [ <Green's D-class: <identity partial perm on [ 2 ]>> ] gap> T := InverseSemigroup([ > PartialPerm([1, 2, 4, 3]), > PartialPerm([1]), > PartialPerm([0, 2])]); <inverse partial perm semigroup of rank 4 with 3 generators> gap> JoinIrreducibleDClasses(T); [ <Green's D-class: <identity partial perm on [ 1, 2, 3, 4 ]>>, <Green's D-class: <identity partial perm on [ 1 ]>>, <Green's D-class: <identity partial perm on [ 2 ]>> ] gap> D := DualSymmetricInverseSemigroup(3); <inverse block bijection monoid of degree 3 with 3 generators> gap> JoinIrreducibleDClasses(D); [ <Green's D-class: <block bijection: [ 1, 2, -1, -2 ], [ 3, -3 ]>> ]
‣ MajorantClosure( S, T ) | ( operation ) |
Returns: A majorantly closed list of elements.
MajorantClosure returns a majorantly closed subset of an inverse semigroup of partial permutations, block bijections or partial permutation bipartitions, S, as a list. See IsMajorantlyClosed (12.2-8).
The result contains all elements of S which are greater than or equal to any element of T (with respect to the natural partial order NaturalLeqPartialPerm (Reference: NaturalLeqPartialPerm)). In particular, the result is a superset of T.
Note that T can be a subset of S or a subsemigroup of S.
gap> S := SymmetricInverseSemigroup(4); <symmetric inverse monoid of degree 4> gap> T := [PartialPerm([1, 0, 3, 0])]; [ <identity partial perm on [ 1, 3 ]> ] gap> U := MajorantClosure(S, T); [ <identity partial perm on [ 1, 3 ]>, <identity partial perm on [ 1, 2, 3 ]>, [2,4](1)(3), [4,2](1)(3), <identity partial perm on [ 1, 3, 4 ]>, <identity partial perm on [ 1, 2, 3, 4 ]>, (1)(2,4)(3) ] gap> B := InverseSemigroup([ > Bipartition([[1, -2], [2, -1], [3, -3], [4, 5, -4, -5]]), > Bipartition([[1, -3], [2, -4], [3, -2], [4, -1], [5, -5]])]);; gap> T := [Bipartition([[1, -2], [2, 3, 5, -1, -3, -5], [4, -4]]), > Bipartition([[1, -4], [2, 3, 5, -1, -3, -5], [4, -2]])];; gap> IsMajorantlyClosed(B, T); false gap> MajorantClosure(B, T); [ <block bijection: [ 1, -2 ], [ 2, 3, 5, -1, -3, -5 ], [ 4, -4 ]>, <block bijection: [ 1, -4 ], [ 2, 3, 5, -1, -3, -5 ], [ 4, -2 ]>, <block bijection: [ 1, -2 ], [ 2, 5, -1, -5 ], [ 3, -3 ], [ 4, -4 ]> , <block bijection: [ 1, -2 ], [ 2, -1 ], [ 3, 5, -3, -5 ], [ 4, -4 ]>, <block bijection: [ 1, -4 ], [ 2, 5, -3, -5 ], [ 3, -1 ], [ 4, -2 ]> , <block bijection: [ 1, -4 ], [ 2, -3 ], [ 3, 5, -1, -5 ], [ 4, -2 ]>, <block bijection: [ 1, -4 ], [ 2, -3 ], [ 3, -1 ], [ 4, -2 ], [ 5, -5 ]> ] gap> IsMajorantlyClosed(B, last); true
‣ Minorants( S, f ) | ( operation ) |
Returns: A list of elements.
Minorants takes an element f from an inverse semigroup of partial permutations, block bijections or partial permutation bipartitions S, and returns a list of the minorants of f in S.
A minorant of f is an element of S which is strictly less than f in the natural partial order of S. See NaturalLeqPartialPerm (Reference: NaturalLeqPartialPerm).
gap> S := SymmetricInverseSemigroup(3); <symmetric inverse monoid of degree 3> gap> x := Elements(S)[13]; [1,3](2) gap> Minorants(S, x); [ <empty partial perm>, [1,3], <identity partial perm on [ 2 ]> ] gap> x := PartialPerm([3, 2, 4, 0]); [1,3,4](2) gap> S := InverseSemigroup(x); <inverse partial perm semigroup of rank 4 with 1 generator> gap> Minorants(S, x); [ <identity partial perm on [ 2 ]>, [1,3](2), [3,4](2) ]
‣ PrimitiveIdempotents( S ) | ( attribute ) |
Returns: A list of elements.
An idempotent in an inverse semigroup S is primitive if it is non-zero and minimal with respect to the NaturalPartialOrder (Reference: NaturalPartialOrder) on S. PrimitiveIdempotents returns the list of primitive idempotents in the inverse semigroup S.
gap> S := InverseMonoid( > PartialPerm([1], [4]), > PartialPerm([1, 2, 3], [2, 1, 3]), > PartialPerm([1, 2, 3], [3, 1, 2]));; gap> MultiplicativeZero(S); <empty partial perm> gap> Set(PrimitiveIdempotents(S)); [ <identity partial perm on [ 1 ]>, <identity partial perm on [ 2 ]>, <identity partial perm on [ 3 ]>, <identity partial perm on [ 4 ]> ] gap> S := DualSymmetricInverseMonoid(4); <inverse block bijection monoid of degree 4 with 3 generators> gap> Set(PrimitiveIdempotents(S)); [ <block bijection: [ 1, 2, 3, -1, -2, -3 ], [ 4, -4 ]>, <block bijection: [ 1, 2, 4, -1, -2, -4 ], [ 3, -3 ]>, <block bijection: [ 1, 2, -1, -2 ], [ 3, 4, -3, -4 ]>, <block bijection: [ 1, 3, 4, -1, -3, -4 ], [ 2, -2 ]>, <block bijection: [ 1, 3, -1, -3 ], [ 2, 4, -2, -4 ]>, <block bijection: [ 1, 4, -1, -4 ], [ 2, 3, -2, -3 ]>, <block bijection: [ 1, -1 ], [ 2, 3, 4, -2, -3, -4 ]> ]
‣ RightCosetsOfInverseSemigroup( S, T ) | ( operation ) |
Returns: A list of lists of elements.
RightCosetsOfInverseSemigroup takes a majorantly closed inverse subsemigroup T of an inverse semigroup of partial permutations, block bijections or partial permutation bipartitions S. See IsMajorantlyClosed (12.2-8). The result is a list of the right cosets of T in S.
For s ∈ S, the right coset overlineTs is defined if and only if ss^-1 ∈ T, in which case it is defined to be the majorant closure of the set Ts. See MajorantClosure (11.14-3). Distinct cosets are disjoint but do not necessarily partition S.
gap> S := SymmetricInverseSemigroup(3); <symmetric inverse monoid of degree 3> gap> T := InverseSemigroup(MajorantClosure(S, [PartialPerm([1])])); <inverse partial perm monoid of rank 3 with 6 generators> gap> IsMajorantlyClosed(S, T); true gap> RC := RightCosetsOfInverseSemigroup(S, T); [ [ <identity partial perm on [ 1 ]>, <identity partial perm on [ 1, 2 ]>, [2,3](1), [3,2](1), <identity partial perm on [ 1, 3 ]>, <identity partial perm on [ 1, 2, 3 ]>, (1)(2,3) ], [ [1,3], [2,1,3], [1,3](2), (1,3), [1,3,2], (1,3,2), (1,3)(2) ], [ [1,2], (1,2), [1,2,3], [3,1,2], [1,2](3), (1,2)(3), (1,2,3) ] ]
‣ SameMinorantsSubgroup( H ) | ( attribute ) |
Returns: A list of elements of the group H-class H.
Given a group H-class H in an inverse semigroup of partial permutations, block bijections or partial permutation bipartitions S, SameMinorantsSubgroup returns a list of the elements of H which have the same strict minorants as the identity element of H. A strict minorant of x in H is an element of S which is less than x (with respect to the natural partial order), but is not equal to x.
The returned list of elements of H describe a subgroup of H.
gap> S := SymmetricInverseSemigroup(3); <symmetric inverse monoid of degree 3> gap> H := GroupHClass(DClass(S, PartialPerm([1, 2, 3]))); <Green's H-class: <identity partial perm on [ 1, 2, 3 ]>> gap> Elements(H); [ <identity partial perm on [ 1, 2, 3 ]>, (1)(2,3), (1,2)(3), (1,2,3), (1,3,2), (1,3)(2) ] gap> SameMinorantsSubgroup(H); [ <identity partial perm on [ 1, 2, 3 ]> ] gap> T := InverseSemigroup( > PartialPerm([1, 2, 3, 4], [1, 2, 4, 3]), > PartialPerm([1], [1]), PartialPerm([2], [2])); <inverse partial perm semigroup of rank 4 with 3 generators> gap> Elements(T); [ <empty partial perm>, <identity partial perm on [ 1 ]>, <identity partial perm on [ 2 ]>, <identity partial perm on [ 1, 2, 3, 4 ]>, (1)(2)(3,4) ] gap> x := GroupHClass(DClass(T, PartialPerm([1, 2, 3, 4]))); <Green's H-class: <identity partial perm on [ 1, 2, 3, 4 ]>> gap> Elements(x); [ <identity partial perm on [ 1, 2, 3, 4 ]>, (1)(2)(3,4) ] gap> AsSet(SameMinorantsSubgroup(x)); [ <identity partial perm on [ 1, 2, 3, 4 ]>, (1)(2)(3,4) ]
‣ SmallerDegreePartialPermRepresentation( S ) | ( attribute ) |
Returns: An isomorphism.
SmallerDegreePartialPermRepresentation attempts to find an isomorphism from the inverse semigroup S to an inverse semigroup of partial permutations with small degree. If S is already a partial permutation semigroup, and the function cannot reduce the degree, the identity mapping is returned.
There is no guarantee that the smallest possible degree representation is returned. For more information see [Sch92].
gap> S := InverseSemigroup(PartialPerm([2, 1, 4, 3, 6, 5, 8, 7])); <partial perm group of rank 8 with 1 generator> gap> Elements(S); [ <identity partial perm on [ 1, 2, 3, 4, 5, 6, 7, 8 ]>, (1,2)(3,4)(5,6)(7,8) ] gap> iso := SmallerDegreePartialPermRepresentation(S);; gap> Source(iso) = S; true gap> R := Range(iso); <partial perm group of rank 2 with 1 generator> gap> Elements(R); [ <identity partial perm on [ 1, 2 ]>, (1,2) ] gap> S := DualSymmetricInverseMonoid(5);; gap> T := Range(IsomorphismPartialPermSemigroup(S)); <inverse partial perm monoid of size 6721, rank 6721 with 3 generators> gap> SmallerDegreePartialPermRepresentation(T); <inverse partial perm monoid of size 6721, rank 6721 with 3 generators> -> <inverse partial perm monoid of rank 30 with 3 generators>
‣ VagnerPrestonRepresentation( S ) | ( attribute ) |
Returns: An isomorphism to an inverse semigroup of partial permutations.
VagnerPrestonRepresentation returns an isomorphism from an inverse semigroup S where the elements of S have a unique semigroup inverse accessible via Inverse (Reference: Inverse), to the inverse semigroup of partial permutations T of degree equal to the size of S, which is obtained using the Vagner-Preston Representation Theorem.
More precisely, if f:S-> T is the isomorphism returned by VagnerPrestonRepresentation(S) and x is in S, then f(x) is the partial permutation with domain Sx^-1 and range Sx^-1x defined by f(x): sx^-1↦ sx^-1x.
In many cases, it is possible to find a smaller degree representation than that provided by VagnerPrestonRepresentation using IsomorphismPartialPermSemigroup (Reference: IsomorphismPartialPermSemigroup) or SmallerDegreePartialPermRepresentation (11.14-8).
gap> S := SymmetricInverseSemigroup(2); <symmetric inverse monoid of degree 2> gap> Size(S); 7 gap> iso := VagnerPrestonRepresentation(S); <symmetric inverse monoid of degree 2> -> <inverse partial perm monoid of rank 7 with 2 generators> gap> RespectsMultiplication(iso); true gap> inv := InverseGeneralMapping(iso);; gap> ForAll(S, x -> (x ^ iso) ^ inv = x); true gap> V := InverseSemigroup( > Bipartition([[1, -4], [2, -1], [3, -5], [4], [5], [-2], [-3]]), > Bipartition([[1, -5], [2, -1], [3, -3], [4], [5], [-2], [-4]]), > Bipartition([[1, -2], [2, -4], [3, -5], [4, -1], [5, -3]])); <inverse bipartition semigroup of degree 5 with 3 generators> gap> IsInverseSemigroup(V); true gap> VagnerPrestonRepresentation(V); <inverse bipartition semigroup of size 394, degree 5 with 3 generators> -> <inverse partial perm semigroup of rank 394 with 5 generators>
‣ CharacterTableOfInverseSemigroup( S ) | ( attribute ) |
Returns: The character table of the inverse semigroup S and a list of conjugacy class representatives of S.
Returns a list with two entries: the first entry being the character table of the inverse semigroup S as a matrix, while the second entry is a list of conjugacy class representatives of S.
The order of the columns in the character table matrix follows the order of the conjugacy class representatives list. The conjugacy representatives are grouped by D-class and then sorted by rank. Also, as is typical of character tables, the rows of the matrix correspond to the irreducible characters and the columns correspond to the conjugacy classes.
This function was contributed by Jhevon Smith and Ben Steinberg.
gap> S := InverseMonoid([ > PartialPerm([1, 2], [3, 1]), > PartialPerm([1, 2, 3], [1, 3, 4]), > PartialPerm([1, 2, 3], [2, 4, 1]), > PartialPerm([1, 3, 4], [3, 4, 1])]);; gap> CharacterTableOfInverseSemigroup(S); [ [ [ 1, 0, 0, 0, 0, 0, 0, 0 ], [ 3, 1, 1, 1, 0, 0, 0, 0 ], [ 3, 1, E(3), E(3)^2, 0, 0, 0, 0 ], [ 3, 1, E(3)^2, E(3), 0, 0, 0, 0 ], [ 6, 3, 0, 0, 1, -1, 0, 0 ], [ 6, 3, 0, 0, 1, 1, 0, 0 ], [ 4, 3, 0, 0, 2, 0, 1, 0 ], [ 1, 1, 1, 1, 1, 1, 1, 1 ] ], [ <identity partial perm on [ 1, 2, 3, 4 ]>, <identity partial perm on [ 1, 3, 4 ]>, (1,3,4), (1,4,3), <identity partial perm on [ 1, 3 ]>, (1,3), <identity partial perm on [ 3 ]>, <empty partial perm> ] ] gap> S := SymmetricInverseMonoid(4);; gap> CharacterTableOfInverseSemigroup(S); [ [ [ 1, -1, 1, 1, -1, 0, 0, 0, 0, 0, 0, 0 ], [ 3, -1, 0, -1, 1, 0, 0, 0, 0, 0, 0, 0 ], [ 2, 0, -1, 2, 0, 0, 0, 0, 0, 0, 0, 0 ], [ 3, 1, 0, -1, -1, 0, 0, 0, 0, 0, 0, 0 ], [ 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 ], [ 4, -2, 1, 0, 0, 1, -1, 1, 0, 0, 0, 0 ], [ 8, 0, -1, 0, 0, 2, 0, -1, 0, 0, 0, 0 ], [ 4, 2, 1, 0, 0, 1, 1, 1, 0, 0, 0, 0 ], [ 6, 0, 0, -2, 0, 3, -1, 0, 1, -1, 0, 0 ], [ 6, 2, 0, 2, 0, 3, 1, 0, 1, 1, 0, 0 ], [ 4, 2, 1, 0, 0, 3, 1, 0, 2, 0, 1, 0 ], [ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 ] ], [ <identity partial perm on [ 1, 2, 3, 4 ]>, (1)(2)(3,4), (1)(2,3,4), (1,2)(3,4), (1,2,3,4), <identity partial perm on [ 1, 2, 3 ]>, (1)(2,3), (1,2,3), <identity partial perm on [ 2, 3 ]>, (2,3), <identity partial perm on [ 1 ]>, <empty partial perm> ] ]
‣ EUnitaryInverseCover( S ) | ( attribute ) |
Returns: A homomorphism between semigroups.
If the argument S is an inverse semigroup then this function returns a finite E-unitary inverse cover of S. A finite E-unitary cover of S is a surjective idempotent separating homomorphism from a finite semigroup satisfying IsEUnitaryInverseSemigroup (12.2-3) to S. A semigroup homomorphism is said to be idempotent separating if no two idempotents are mapped to the same element of the image.
gap> S := InverseSemigroup([PartialPermNC([1, 2], [2, 1]), > PartialPermNC([1], [1])]); <inverse partial perm semigroup of rank 2 with 2 generators> gap> cov := EUnitaryInverseCover(S); <inverse partial perm semigroup of rank 4 with 2 generators> -> <inverse partial perm semigroup of rank 2 with 2 generators> gap> IsEUnitaryInverseSemigroup(Source(cov)); true gap> S = Range(cov); true
‣ NambooripadLeqRegularSemigroup( S ) | ( attribute ) |
Returns: A function.
NambooripadLeqRegularSemigroup returns a function that, when given two elements x, y of the regular semigroup S, returns true if x is less than or equal to y in the Nambooripad partial order on S. See also NambooripadPartialOrder (11.15-2).
gap> S := BrauerMonoid(3); <regular bipartition *-monoid of degree 3 with 3 generators> gap> IsRegularSemigroup(S); true gap> Size(S); 15 gap> NambooripadPartialOrder(S); [ [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] ] gap> NambooripadLeqRegularSemigroup(S)(Elements(S)[3], Elements(S)[9]); false gap> NambooripadLeqRegularSemigroup(S)(Elements(S)[2], Elements(S)[15]); true
‣ NambooripadPartialOrder( S ) | ( attribute ) |
Returns: The Nambooripad partial order on a regular semigroup.
The Nambooripad partial order ≤ on a regular semigroup S is defined by s≤t if the principal right ideal of S generated by s is contained in the principal right ideal of S generated by t and there is an idempotent e in the R-class of s such that s=et. The Nambooripad partial order coincides with the natural partial order when considering inverse semigroups NaturalPartialOrder (Reference: NaturalPartialOrder).
NambooripadPartialOrder returns the Nambooripad partial order on the regular semigroup S as a list of sets of positive integers where entry i in NaturalPartialOrder(S) is the set of positions in Elements(S) of elements which are less than Elements(S)[i]. See also NambooripadLeqRegularSemigroup (11.15-1).
gap> S := BrauerMonoid(3); <regular bipartition *-monoid of degree 3 with 3 generators> gap> IsRegularSemigroup(S); true gap> Size(S); 15 gap> NambooripadPartialOrder(S); [ [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ], [ 1, 2, 3, 4, 5, 6, 7, 8, 9 ] ] gap> NambooripadLeqRegularSemigroup(S)(Elements(S)[3], Elements(S)[9]); false gap> NambooripadLeqRegularSemigroup(S)(Elements(S)[2], Elements(S)[15]); true
generated by GAPDoc2HTML