Goto Chapter: Top 1 2 3 4 5 6 7 8 9 10 11 Bib Ind
 [Top of Book]  [Contents]   [Previous Chapter]   [Next Chapter] 

7 Searching in groups and orbits
 7.1 Searching using orbit enumeration
 7.2 Random searches in groups
 7.3 The dihedral trick and applications
 7.4 Orbit statistics on vector spaces
 7.5 Finding generating sets of subgroups

7 Searching in groups and orbits

7.1 Searching using orbit enumeration

As described in Subsection 3.1-4 the standard orbit enumeration routines can perform search operations during orbit enumeration. If one is looking for a shortest word in the generators of a group to express a group element with a certain property, then this natural breadth-first search can be used, for example by letting the group act on its own elements, either by multiplication or by conjugation.

All technical instructions to do this are already given in Subsection 3.1-4, so we are content to provide an example here. Assume you want to find the shortest way to express some \(7\)-cycle in the symmetric group \(S_{{10}}\) as a product of generators \(a := \)(1,2,3,4,5,6,7,8,9,10) and \(b := \)(1,2). Then you could do this in the following way:

gap> gens := [(1,2,3,4,5,6,7,8,9,10),(1,2)];
[ (1,2,3,4,5,6,7,8,9,10), (1,2) ]
gap> o := Orb(gens,(),OnRight,rec( report := 2000,
> lookingfor := 
> function(o,x) return NrMovedPoints(x) = 7 and Order(x)=7; end,
> schreier := true ));
<open orbit, 1 points with Schreier tree looking for sth.>
gap> Enumerate(o);
<open orbit, 614 points with Schreier tree looking for sth.>
gap> w := TraceSchreierTreeForward(o,PositionOfFound(o));
[ 1, 1, 1, 1, 1, 1, 1, 2, 1, 2, 1, 2 ]
gap> ActWithWord(o!.gens,w,o!.op,o[1]);                  
(1,10,9,8,7,6,5)
gap> o[PositionOfFound(o)] = ActWithWord(o!.gens,w,o!.op,o[1]);
true
gap> EvaluateWord(o!.gens,w);
(1,10,9,8,7,6,5)

The result shows that \(a^6 \cdot (a\cdot b)^3\) is a \(7\)-cycle and that there is no word in \(a\) and \(b\) with fewer than \(12\) letters expressing a \(7\)-cycle.

Note that we can go on with the above orbit enumeration to find further words to express \(7\)-cycles.

7.2 Random searches in groups

Another possibility to look for elements in a group satisfying certain properties is to look at random elements, usually obtained by doing product replacement (see Section 6.2). Although this can lead to very long expressions as words in the generators, one can cope with this problem by using the maxdepth option of the product replacer objects, which just reinitialises the product replacement table after a certain number of product replacements has been performed. To organise all this conveniently, there is the concept of "random searcher objects" described here.

7.2-1 RandomSearcher
‣ RandomSearcher( gens, testfunc[, opt] )( operation )

Returns: a random searcher object

gens must be a list of group generators, testfunc a function taking as argument one group element and returning true or false. opt is an optional options record. For possible options see below.

At first, the random searcher object is just initialised but no random searching is performed. The actual search is triggered by the Search (7.2-2) operation (see below). The idea of random searcher objects is that a product replacer object is created and during a search random elements are produced using this product replacer object, and for each group element produced the function testfunc is called. If this function returns true, the search stops and the group element found is returned.

The following options can be bound in the options record opt:

exceptions

This component can be a list to initialise the exception list in the random searcher object. Group elements in this list are not considered as successful searches. This list is also used to continue search operations to found more suitable group elements as every group element considered "found" is added to that list before returning it. Thus every element will only be found once.

maxdepth

Sets the maxdepth option of the created product replacer object. This limits the length of the expression as product of the generators of the found group elements.

addslots

Sets the addslots option of the created product replacer object.

scramble

If this component is bound at all, then the created product replacer object is created with options scramble=100 and scramblefactor=10 (the default values), otherwise the options scramble=0 and scramblefactor=0 are used, leading to no scrambling at all. See ProductReplacer (6.2-1) for details on the product replacement algorithm.

Note that of course the generators in gens may have memory. However, the function testfunc is called with the group element with memory stripped off.

7.2-2 Search
‣ Search( rs )( operation )

Returns: a group element

Runs the search with the random searcher object rs and returns with the first group element found.

7.3 The dihedral trick and applications

With the "dihedral" trick we mean the following: Two involutions \(a\) and \(b\) in a group always generate a dihedral group. Thus, to find a pseudo-random element in the centraliser of an involution \(a\), we can proceed as follows: Create a pseudo-random element \(c\), then \(b := a^c\) is another involution. If then \(ab\) has order \(2o\), we can use \((ab)^o\). Otherwise, if the order of \(ab\) is \(2o-1\), then \((ab)^o \cdot c^{{-1}}\) centralises \(a\).

This trick allows to efficiently produce elements in the centraliser of an involution and thus, with high probability, generators for the full centraliser.

There are the following functions:

7.3-1 FindInvolution
‣ FindInvolution( pr )( function )

Returns: an involution

pr must be a product replacer object (see Section 6.2). Searches an involution by finding a random element of even order and powering up. Returns the involution.

7.3-2 FindCentralisingElementOfInvolution
‣ FindCentralisingElementOfInvolution( pr, a )( function )

Returns: a group element

pr must be a product replacer object (see Section 6.2). Produces one random element and builds an element the centralises the involution a using the dihedral trick described above.

7.3-3 FindInvolutionCentralizer
‣ FindInvolutionCentralizer( pr, a, nr )( function )

Returns: a list of nr group elements

pr must be a product replacer object (see Section 6.2) and a and involution. This function uses FindCentralisingElementOfInvolution (7.3-2) nr times to produce an element centralising the involution a and returns the list of results.

7.4 Orbit statistics on vector spaces

The following two functions are tools to get a rough and quick estimate about the average orbit length of a group acting on a vector space.

7.4-1 OrbitStatisticOnVectorSpace
‣ OrbitStatisticOnVectorSpace( gens, size, ti )( function )

Returns: nothing

gens must be a list of matrix group generators and size an integer giving an upper bound for the lengths of orbits (for example given by the order of the group generated by gens). ti is an integer specifying the number of seconds to run. This function enumerates orbits of random vectors in the natural space the group is acting on (with an upper limit of length given by size). The average length and some other information is printed on the screen.

7.4-2 OrbitStatisticOnVectorSpaceLines
‣ OrbitStatisticOnVectorSpaceLines( gens, size, ti )( function )

Returns: nothing

gens must be a list of matrix group generators and size an integer giving an upper bound for the lengths of orbits (for example the order of the group generated by gens). ti is an integer specifying the number of seconds to run. This function enumerates orbits of random one-dimensional subspaces in the natural space the group is acting on (with an upper limit of length given by size). The average length and some other information is printed on the screen.

7.5 Finding generating sets of subgroups

The following function can be used to find generators of a subgroup of a group \(G\), expressed as a straight line program in the generators of \(G\).

7.5-1 FindShortGeneratorsOfSubgroup
‣ FindShortGeneratorsOfSubgroup( G, U[, membopt] )( method )

Returns: a record described below

The arguments U and G must be GAP group objects with U being a subgroup of G. The argument membopt can be a function taking two arguments, namely a group element and a group, that checks, whether the group element lies in the group or not, returning true or false accordingly. You can usually just use the function \in as third argument. Note that this function will only ever be called with U as its second argument so you can in fact provide a function which ignores its second argument and has U somehow built in it.

Optionally, the third argument membopt can also be an options record. The component membershiptest has the same meaning like the third argument membopt above. The component sizetester can be bound to a function which estimates the size of a group generated by some elements in U. This estimate function can for example be a function which runs a random Schreier-Sims algorithm. In particular it may underestimate the size with a certain probability. The method FindShortGeneratorsOfSubgroup will keep looking for elements to generate U until the sizetester returns the same number as for U itself. Note that to avoid the possibility that the sizetester underestimates the size of U in the first place you can bind the component sizeU in the options record to the correct size of U or make sure that the group object U does know its size before the call to FindShortGeneratorsOfSubgroup.

This function does a breadth-first search to find elements in U using the generators of G. It then uses calculates the size of the group generated and proceeds in this way, until a generating system for U is found in terms of the generators of G. Those generators are guaranteed to be shortest words in the generators of G lying in U.

The function returns a record with two components bound: gens is a list of generators for U and slp is a GAP straight line program expressing exactly those generators in the generators of G.

Note that this function only performs satisfactorily when the index of U in G is not to huge. It also helps if the groups come in a representation in which GAP can compute efficiently for example as permutation groups.

 [Top of Book]  [Contents]   [Previous Chapter]   [Next Chapter] 
Goto Chapter: Top 1 2 3 4 5 6 7 8 9 10 11 Bib Ind

generated by GAPDoc2HTML